Hey folks! So I've got a Turnigy X3S, and it's got a weird issue. The display reports the heatbed temperature correctly if the heatbed is on but the nozzle is off. However, once I turn the nozzle on, the hotend temperature is reported correctly for the Sarkari Result Pnr Status Showbox nozzle, but the heatbed temperature reported continues to rise until I get a heatbed max temp error. The heatbed is being reported along with the nozzle temp (tested, somehow the hotend thermistor is reporting for both the nozzle and heatbed once the hotend gets hotter than the bed. Anybody have a clue what's going on?