Results 1 to 5 of 5
  1. #1

    Title
    Junior Member
    Join Date
    Jul 2017
    Posts
    2

    Ender 2 vs CR 10 Print Quality

    I am new to the Forum and to 3D printing.
    I wish I had the space for the CR 10 but don't, especially since I will be adding a cover for ABS printing. So I am looking at the Ender 2. There are very few reviews that talk specifically about print quality. How does the Ender 2 compare to the CR 10 with PLA and ABS (assuming I add insulation to the bottom of the heater plate and a printer cover)?
    If this is discussed in another thread please point me in the right direction.
    I am also not opposed to spending $400 for a smaller printer than the CR 10 provided it handle 6" x 6" x 6" print areas, as long as it has good print quality on ABS and PLA. Good meaning equal to or better than the CR 10 for small parts (gears, housings, brackets, .....).
    Thanks

  2. #2
    David Kim's Avatar
    Title
    Super Moderator
    Join Date
    Dec 2017
    Location
    Pittsburgh, PA
    Posts
    13

  3. #3
    David Kim's Avatar
    Title
    Super Moderator
    Join Date
    Dec 2017
    Location
    Pittsburgh, PA
    Posts
    13

  4. #4
    David Kim's Avatar
    Title
    Super Moderator
    Join Date
    Dec 2017
    Location
    Pittsburgh, PA
    Posts
    13
    Printed by John Burger on his Ender-2

    29258207_2458484404377226_7539580277970960384_n.jpg

  5. #5
    David Kim's Avatar
    Title
    Super Moderator
    Join Date
    Dec 2017
    Location
    Pittsburgh, PA
    Posts
    13
    Printed by Joh Bonjobi on his Ender-2

    29177263_10212604365927973_4747588004967612416_o.jpg

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •